TP-Link TL-SF1008P 8-Port Unmanaged Desktop Fast Ethernet Switch w/ 4 x PoE Ports (53W)

TP-Link TL-SF1008P 8-Port Power Over Ethernet Switch (PoE) is easy to install and use. It requires no configuration during installation.

TP-Link TL-SF1008P 8-Port Unmanaged Desktop Fast Ethernet Switch w/ 4 x PoE Ports (53W)

TP-Link TL-SF1008P 8-Port Power Over Ethernet Switch (PoE)

TP-Link TL-SF1008P 8-Port Power Over Ethernet Switch (PoE) is easy to install and use. It requires no configuration during installation. With desktop design, outstanding performance and quality, the TP-Link TL-SF1008P 8-port 10/100M Desktop PoE Switch is a great selection for expanding your home or office network.

Key Features

• Four (4) of Eight (8) Ports provide PoE.


• Supports PoE power up to 15.4W for each PoE port.


• Supports PoE power up to 53W for all PoE ports.


• Supports PoE IEEE802.3af compliant PDs.


• Supports IEEE802.3x flow control for Full-duplex Mode and backpressure for Half-duplex Mode.


• 1K entry MAC address table of the TL-SF1008P with auto-learning and auto-aging.


• LED indicators for monitoring power, link, activity and speed.


• External power adapter supply.

IEEE 802.3af compliant

4 of the 8 Auto-Negotiation RJ45 ports (port-1 to port-4) of the TP-Link TL-SF1008P switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af compliant Powered Devices (PDs).

In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.

TP-Link TL-SF1008P PoE Switch has the priority * function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is >= 53W, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port.

Note: *priority (port-1>port-2>port-3>port-4): This function will help protect the system if the system power becomes overloaded. For example, Port 1, 2 and 4 are using 15.4w (maximum power per port is 15.4W), the system power is 46.2w in total (PoE max LED is red ).

If there is an additional PD inserted to Port 3 with 10w then the system will cut off Port 4 to protect the system, this means Port 1, 2 will use 15.4w, and Port3 will use 10w, and no power will be supplied to Port 4

Specifications

Standard Warranty: Limited Lifetime