Ubiquiti
Ubiquiti USW-Pro-48 UniFi Switch Pro 48
Ubiquiti USW-Pro-48 UniFi Switch Pro 48
SKU:USW-Pro-48
Out of stock
Couldn't load pickup availability
Ubiquiti UniFi Switch Pro 48 (USW-Pro-48)
Attention: The item you are viewing is classified as a ‘special order’ commercial-only product. Please note, this item cannot be returned unless found to be faulty. We appreciate your understanding.
Ubiquiti UniFi Switch Pro 48 is a fully managed Layer 3 switch with 48 Gigabit Ethernet ports. Four 10G SFP+ uplinks offer link aggregation for higher capacity and increased availability.
Ubiquiti USW-Pro-48 UniFi 48-Port Cloud Managed Rackmount Gigabit Switch w/ 4 x 10G SFP+ Ports
Ubiquiti UniFi Switch Pro 48 (USW-Pro-48)
Ubiquiti UniFi Switch Pro 48 is a fully managed Layer 3 switch with 48 Gigabit Ethernet ports. Four 10G SFP+ uplinks offer link aggregation for higher capacity and increased availability.Key Features
- Forty-eight (48) Gigabit RJ45 ports.
- Four (4) 10G SFP+ ports.
- Layer 2 and Layer 3 features.
- UniFi SmartPower RPS DC input.
- Near-silent cooling.
- 1.3-inch touchscreen display.
- Managed by UniFi Network Controller.
The UniFi Switch Pro 48 features a rich set of Layer 2 capabilities and integrates Layer 3 functionality such as inter-VLAN routing, static routing, and DHCP server. The UniFi Switch Pro 48 is an ideal aggregation and access layer switch for any UniFi solution. It combines innovative near-silent cooling with UniFi SmartPower RPS power redundancy. UniFi Network Controller and UniFi Network mobile app allow admins to configure and monitor virtually all of the switch features in an intuitive graphical user interface from anywhere.
Fanless, Silent Cooling
The passive cooling design allows the UniFi USW-Pro-48 Switch to be located in any workspace.
Fibre Connectivity
SFP+ ports enable high-capacity uplinks of up to 10 Gbps, so you can directly connect to a high-performance storage server or deploy a long-distance uplink to another switch.
Layer 3 Features
In addition to Layer 2 switching protocols and features, the UniFi USW-Pro-48 Switch offers Layer 3 capabilities, such as inter-VLAN routing, static routing, and DHCP server functionality.
Switching Performance
The USW-Pro-48 offers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss.
Near silent cooling
Ubiquiti’s new airflow design reduces the need for fan usage.
UniFi SmartPower RPS, USP-RPS, is Ubiquiti’s PSU failover system.
In the event of a UniFi switch power supply failure, the USP-RPS automatically supplies redundant power to the failed device. One UniFi SmartPower device can support up to 6 devices until the failed device is replaced.
Touch screen display
The 1.3" touchscreen display allows easy monitoring and quick troubleshooting.
Switch Configuration
You can access any managed UniFi Switch through the UniFi Controller to configure a variety of features:
- Operation mode (switching, mirroring, or aggregate) per port
- Network/VLAN configuration
- Jumbo frame and flow control services
- Network settings
- Storm control setting per port
- Spanning tree configuration
- 802.1X control and RADIUS VLAN
- Debug terminal option for command-line interface
Switch Port Status
You can also view status information for each port:
- Connection speed and duplex mode
- TX/RX data rates
- Network/VLAN setting
Software Features
The UniFi Network Controller software offers the following features:
- Centralized configuration management (including configuration cloning)
- Auto-MDIX automatically adjusts as needed for straight through or crossover cable
- 802.1X (RADIUS) authentication and dynamic VLAN
Specifications
Dimensions
- 442.4 x 285.4 x 43.7 mm (17.42 x 11.24 x 1.72 in.)
Weight
- 4.00 kg (8.82 lb.)
- 4.09 kg (9.02 lb.) With Brackets
Interfaces
- Networking
- 48 x 10/100/1000 RJ45 Ports
- 4 x 1/10G SFP+ Ethernet Ports
- Management
- Ethernet In-Band
Total Non-Blocking Throughput
- 88 Gbps
Switching Capacity
- 176 Gbps
Forwarding Rate
- 130.944 Mpps
Power Method
- Universal Input
- 100-240VAC, 50/60 Hz
- USP RPS DC Input
- 11.5VDC, 5.22A
Power Supply
- AC/DC, Internal, 60W
Voltage Range
- 100 to 240VAC
Max Power Consumption
- 60W
LEDs
- RJ45 Data Ports
- Speed/Link/Activity
- SFP+ Data Ports
- Link/Activity
ESD/EMP Protection
- Air: ± 16 kV, Contact: ± 12 kV
Shock and Vibration
- ETSI300-019-1.4 Standard
Operating Temperature
- -5ºC to 45ºC (23ºF to 113ºF)
Operating Humidity
- 10% - 90% Non-condensing
Certifications
- CE, FCC, IC
Package Contents
- 1 x UniFi USW-Pro-48
- 2 x Rackmount Brackets
- 8 x Bracket Screws
- 4 x Mounting Screws
- 4 x Cage Nuts
- 1 x Power Cord
- 4 x Rubber Feet
Standard Warranty: 2-Years
