1 3

DrayTek

DrayTek Q2200x VigorSwitch 16-Port L2+ Managed 2.5-Gigabit Switch

DrayTek Q2200x VigorSwitch 16-Port L2+ Managed 2.5-Gigabit Switch

VSQ2200X-K

£455.96 incl. VAT | £379.97 excl. VAT
Tax included. Shipping calculated at checkout.

Out of stock

DrayTek Q2200x VigorSwitch 16-Port L2+ Managed 2.5-Gigabit Switch

DrayTek Q2200x VigorSwitch 16-Port L2+ Managed Rackmount 2.5-Gigabit Switch has four (4) dedicated SFP+ ports for uplinks, each operating at up to 10-Gigabits per second.

DrayTek Q2200x VigorSwitch 16-Port L2+ Managed Rackmount 2.5-Gigabit Switch w/ 4 x 10G SFP+ Ports

DrayTek Q2200x VigorSwitch 16-Port L2+ Managed 2.5-Gigabit Switch

DrayTek Q2200x VigorSwitch 16-Port L2+ Managed Rackmount 2.5-Gigabit Switch has four (4) dedicated SFP+ ports for uplinks, each operating at up to 10-Gigabits per second.

The faster 10-Gigabit uplink capability allows you to make high bandwidth links to Network Attached Storage, Servers and other switches, to help reduce the risk of bottlenecks occurring within your network.

The SFP+ ports provide compatibility with your choice of SFP / SFP+ modules (not included) and therefore the most appropriate medium for your application. Connect a passive Direct Attach SFP+ cable such as the DrayTek DAC-CX10-01M (sold separately) to the SFP+ module port of 1Gbps/10Gbps capable Network Attached Storage, Servers and Switches, for a cost effective, up to 10Gbps network link.

Key Features

  • 2.5 Gigabit Ethernet Ports
    Increased the speed of your LANs while using existing CAT 5E or better cable infrastructure.
  • Layer 2+ VLAN Routing
    Use the VigorSwitch to link multiple subnets with Static Routes, VLAN Routing and integrated DHCP server.
  • Auto Surveillance VLAN
    Recognise traffic from IP cameras and IP phones automatically and add CoS tag for QoS prioritisation.
  • IP Conflict Prevention
    Improve network stability by avoiding IP conflicts caused by a misconfigured or malicious host.
  • Access Control
    VigorSwitch Q2200x supports ACL by IP/MAC and 802.1x port access control with RADIUS to filter.
  • Energy-Efficient Ethernet
    Compliant with IEEE 802.3az to reduce power consumption.
  • 10GbE SFP+ Ports
    Six (6) SFP+ ports provide fast, high bandwidth uplinks to Fibre, Switches, Servers and Network Attached Storage.
  • QoS (Quality of Service)
    Improve the performance of critical traffic by prioritising the traffic with CoS, DSCP, and IP Precedence tag.
  • IPv6 Ready
    VigorSwitch Q2200x supports IPv6 by offering MLD Snooping, IPv6 ACL, and IPv6 DNS Resolver.
  • ONVIF IP Camera Management
    Manage and view ONVIF capable cameras, automatically detecting their topology on the network.
  • Rack Mountable
    Comes with rack mountable brackets to make your deployment even easier.
  • Central Switch Management
    Set up VLAN easily from the router and get a centralised hierarchy view of the switches.

Specifications

Physical Interfaces

  • 16 RJ-45 Ethernet Ports – 10/100/1000/2500Mbps
  • 4 SFP+ Ports – 1000Mbps/10Gbps
  • Console Port (RJ-45 physical, RS-232 electrical)

VLAN

  • 802.1q Tag-based VLAN
  • Port-based and MAC-based VLANs
  • QinQ (Basic)
  • GVRP – General VLAN Registration Protocol
  • Up to 256 VLANs (out of 4096 VLAN IDs)
  • 802.1v Protocol-Based VLAN
  • Voice VLAN (OUI Mode)
  • Surveillance VLAN (OUI Mode)
  • Management VLAN
  • Port Isolation

QoS

  • Support 8 priority queues
  • Port-Based rate control (Ingress & Egress)
  • Priority queue schedule (WRR or Strict Priority)
  • Rate Limit
  • Class of Service
    • 802.1p CoS
    • DSCP
    • CoS-DSCP
    • IP Precedence ToS

Network Security

  • IP Source Guard with ARP inspection
  • Storm Control (Broadcast, Unknown Multicast, Unknown Unicast)
  • DoS Attack protection
  • AAA Authentication
  • MAC Authentication
  • Protected Port / Port Isolation
  • Static Port Security
  • Dynamic ARP Inspection
  • DHCP Snooping with Option 82
  • Loop Detection & Prevention
  • Access Control Lists (ACL)
    • Up to 512 ACL Entries
    • Source and destination MAC
    • VLAN ID
    • IPv4/v6 address
    • Protocol
    • TCP/UDP port

Spanning Tree

  • Spanning Tree Protocol (STP)
  • Rapid Spanning Tree Protocol (RSTP)
  • Multiple Spanning Tree Protocol (MSTP)

Link Aggregation

  • Combine multiple ports to increase bandwidth
  • 8 Aggregation Groups
  • Up to 8 ports in each group
  • LACP or Static setup
  • Supports traffic load balancing

Networking Performance

  • Switching Capacity: 160 Gbps
  • Forwarding Rate: 119.04 Mpps at 64 bytes
  • MAC Addresses Supported: 16,000
  • Jumbo Frames up to 12KB
  • Packet Buffer size: 12Mbit
  • Layer 3 Routing Table: Up to 6000 Entries

Multicast

  • Up to 256 multicast groups
  • Multicast Group Filtering / Throttling
  • IGMP Snooping V2/V3 (BISS)
  • IGMP V2/V3 Querier
  • Multicast VLAN registration
  • MLD Snooping V1/V2
    • Immediate Leave
    • Report Suppression
    • IGMP/MLD Querier

AAA

  • RADIUS / TACACS+ Authentication for Management
  • Multiple AAA Server
  • MAC / Inaccessible Authentication bypass
  • RADIUS Authentication 802.1X
    • Accounting
    • Guest VLAN
    • Port based Authorisation
      • 802.1X Single/Multi
      • MAC-based
      • Web-based
  • Attribute Assignment
    • User Privilege
    • VLAN
  • TACACS+ Authentication
    • Port Authorisation
    • Accounting

ONVIF Surveillance Management

  • Discovery of ONVIF-compliant IP Cameras
  • Surveillance Topology
  • Real-Time Video Streaming
  • ONVIF Device Maintenance
    • Device Information
    • Network Settings Configuration
    • Time Settings
    • Reboot
    • Reset to Factory Default Settings
    • Ping Check with Mail Alert on disconnection

Management

  • Central Management
    • VigorACS
    • VigorConnect
    • Vigor Router Switch Management (requires router firmware support)
  • Running/Startup/Backup Configuration
  • sFlow
  • IPv4 & IPv6 Dual-Stack
  • LLDP(802.1ab) + MED
  • Web User Interface (HTTP or HTTPS)
  • Firmware Upgrade/Backup by HTTP/HTTPS
  • HTTP (Non-TLS) can be disabled for increased security
  • Configuration Backup/Restore
  • Factory Default
  • System Reboot
  • Dual Firmware Image (Active & Backup Firmware)
  • Command Line Interface (CLI) via SSH/Telnet
  • Console Port (RJ45) for CLI management
  • OpenVPN Client with Certificate-based auth
  • SNMP v1, v2c, v3 (with Generic Traps)
  • RMON Groups 1, 2, 3, 9 (History, Statistics, Alarms, Events)
  • SNTP (Simple Network Time Protocol)

Diagnostics

  • Port Status & Usage display
  • CPU/RAM Usage display
  • MAC Address Table
  • Device Check
  • Syslog
  • Mail Alert
    • Port Status
    • Port Speed Change
    • System Restart
    • Device Check
    • IP Conflict
    • ONVIF IP Camera Snapshot
  • Port Mirroring
  • Ping Diagnostics
  • Port-based Cable Test

Hardware Monitor

  • Remote Monitoring through Web Interface & VigorACS
  • Hardware Monitor Data Recording & Graphing

Layer 3 Networking Features

  • Static Route
  • VLAN Routing
  • Virtual Router Redundancy (VRRP) Protocol

IPv4 Features

  • DHCP Client
  • DNS Client
  • DHCP Server
    • Up to 8 subnets
    • Option 82, 66, 67
    • DHCP Relay
    • DHCP Snooping
    • DHCP IP Source Guard

IPv6 Features

  • Auto Configuration
  • Static IPv6 Address & Prefix Length
  • Static IPv6 Default Gateway
  • IPv6 Neighbour Discovery (ND)
  • IPv6 Duplicate Address Detection
  • ICMPv6
  • DHCPv6 Client

General IEEE Standards Compliance

  • 802.3 10Base-T
  • 802.3u 100Base-T
  • 802.3ab 1000Base-T
  • 802.3ae 10GBase-T
  • 802.3x Flow Control Capability
  • 802.3 Auto-negotiation
  • 802.3ad Port trunk with LACP
  • 802.3az Energy Efficient Ethernet
  • 802.1q VLAN
  • 802.1p Class of Service
  • 802.1d Spanning Tree
  • 802.1w Rapid Spanning Tree
  • 802.1s Multiple Spanning Tree
  • 802.1x Port Based Network Access Control
  • 802.1ab Link Layer Discovery Protocol (LLDP)
  • 802.1ad QinQ

Operating Requirements

  • Power Input Requirements: 100-240VAC
  • Power supply: Internal
  • Maximum Input Power Consumption: 45 Watts
  • Cooling: Fan
  • Operating Temperature: 0°C to 50°C
  • Storage Temperature: -20°C to 70°C
  • Operating Humidity: 10% to 90% (non-condensing)

Physical Specifications

  • Dimensions: 440 x 205 x 44 mm (W x D x H)
  • Rack mountable: 1U
  • Weight: 2.8 kg (excluding SFP modules/cables)
  • Brackets included for rack or wall mounting
  • UKCA, ROHS & CE Compliant

Package Contents

  • 1 x VigorSwitch Q2200x Network Switch
  • 1 x UK IEC13 Power Cable
  • 1 x 1U Rack Mount Fittings
  • 1 x Console Cable (RJ-45)
  • 1 x Quick Start Guide

Standard Warranty: 2-Years

View full details