Rackmount Smart-UPS 2U SRT1000RMXLI (1000W/1000VA)
Rackmount Smart-UPS 2U SRT1000RMXLI (1000W/1000VA)
SKU:SRT1000RMXLI
Out of stock
APC SRT1000RMXLI Smart-UPS 2U Rackmount UPS Uninterruptible Power Supply (1000W/1000VA)
Attention: The item you are viewing is classified as a ‘special order’ commercial-only product. Please note, this item cannot be returned unless found to be faulty. We appreciate your understanding.
APC SRT1000RMXLI Smart-UPS 2U Rackmount UPS Uninterruptible Power Supply is a high density, double-conversion on-line power protection device with scalable runtime.
APC SRT1000RMXLI Smart-UPS 2U Rackmount UPS Uninterruptible Power Supply (1000W/1000VA)
The APC SRT1000RMXLI Smart-UPS 2U Rackmount UPS Uninterruptible Power Supply is a high density, double-conversion on-line power protection device with scalable runtime.Key Features
-
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance.
-
Cold-start capable
Provides temporary battery power when the utility power is out.
-
User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries, reducing Mean Time to Repair (MTTR).
-
ECO Mode
Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection.
-
LCD graphics display
Text and mimic diagrams that display modes of operation, system parameters and alarms.
-
Rack/Tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
-
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced.
Specifications
Output
Max Configurable Power (Watts)
- 1.0kWatts / 1.0kVA
Output Voltage Distortion
- Less than 2%
Output Frequency (sync to mains)
- 50/60 Hz +/- 3 Hz Sync to mains
Output Connections
- 6 x IEC 60320 C13 (Battery Backup)
- 6 x IEC 320 C13 (Battery Backup)
Nominal Output Voltage
- 230V
Other Output Voltages
- 220 V, 240 V
Load Crest Factor
- 3 : 1
Topology
- Double conversion online
Waveform type
- Sine wave
Bypass
- Built-in bypass
Input
Input frequency
- 40 - 70 Hz Auto-sensing
Input Connections
- BS1363A British, IEC 60320 C14, Schuko CEE 7 / EU1-16P
Nominal Input Voltage
- 230V
Input voltage range for main operations
- 50 - 150 40% load, 80 - 150V
Number of Power Cords
- 1
Cord Length
- 1.8 metres
Batteries & Runtime
Battery type
- Lead-acid battery
Included Battery Modules
- 1
Typical recharge time
- 3 hour(s)
Replacement Battery
- APCRBC155
Expected Battery Life (years)
- 3 - 5
Battery Charge Power (Watts)
- 97 Watts
Extendable Run Time
- 1
Extended Run Options
- APC-Smart-UPS-SRT-1000VA-RM-230V
Communications & Management
Interface Port(s)
- RJ45 Serial, Smart-Slot, USB
Control panel
- Multifunction LCD status and control console
Audible Alarm
- Audible and visible alarms prioritized by severity
Emergency Power Off (EPO)
- Yes
Surge Protection and Filtering
Surge energy rating
- 432 Joules
Physical
Maximum Height
- 85 mm, 8.5 cm
Maximum Width
- 432 mm, 43.2 cm
Maximum Depth
- 505 mm, 50.5 cm
Net Weight
- 21.0 kg
Colour
- Black
Environmental
Operating Temperature
- 0ºC - 40ºC
Operating Relative Humidity
- 0% - 95% (Non-condensing)
Operating Elevation
- 0 - 3048 metres
Storage Temperature
- -20ºC - 50ºC
Storage Relative Humidity
- 0% - 95% (Non-condensing)
Storage Elevation
- 0 - 15240 metres
Audible noise at 1 metre from surface of unit
- 50.0dBA
Online thermal dissipation
- 317.0BTU/hr
Protection Class
- IP20
Conformance
Approvals
- CE, EAC
Package
Package Contents
- 1 x SRT1000RMXLI
- 1 x Set of rack mounting brackets
- 1 x Set of rack mounting hardware
- 1 x Set of rack mounting support rails
- 1 x USB cable
- 1 x Warranty card
- 1 x CD with software
- 1 x Communication cable
- 1 x Documentation CD