Skip to product information
1 of 4

APC

Rackmount Smart-UPS 2U SRT1000RMXLI-NC (1000W/1000VA)

Rackmount Smart-UPS 2U SRT1000RMXLI-NC (1000W/1000VA)

SKU:SRT1000RMXLI-NC

£1,889.28 incl. VAT | £1,574.40 excl. VAT
Tax included. Shipping calculated at checkout.

Out of stock

APC SRT1000RMXLI-NC Smart-UPS 2U Rackmount Uninterruptible Power Supply (1000W/1000VA)

Attention: The item you are viewing is classified as a ‘special order’ commercial-only product. Please note, this item cannot be returned unless found to be faulty. We appreciate your understanding.

APC SRT1000RMXLI-NC Smart-UPS 2U Rackmount Uninterruptible Power Supply provides intelligent and efficient network power protection from entry level to scaleable runtime. The SRT1000RMXLI-NC is the ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.

APC SRT1000RMXLI-NC Smart-UPS 2U Rackmount Uninterruptible Power Supply (1000W/1000VA)


APC SRT1000RMXLI-NC Smart-UPS 2U Uninterruptible Power Supply


The APC SRT1000RMXLI-NC Smart-UPS 2U Rackmount Uninterruptible Power Supply provides intelligent and efficient network power protection from entry level to scaleable runtime. The SRT1000RMXLI-NC is the ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.

Key Features

    • Output power capacity: 1.0kWatts / 1.0kVA

    • Rack Height: 2U

    • Output Connections:

      • Six (6) IEC 60320 C13 (Battery Backup)

    • Nominal Output Voltage: 230V

    • Nominal Input Voltage: 230V

    • Input Connections: BS1363A British, IEC 60320 C14, Schuko CEE 7 / EU1-16P

    • Cord Length: 1.8 metres

    • Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance

    • ECO Mode: Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection

  • LCD graphics display: Text and mimic diagrams that display modes of operation, system parameters and alarms.

Specifications

Max Configurable Power (Watts)

    • 1.0kWatts / 1.0kVA


Output Voltage Distortion

    • Less than 2%


Output Frequency (sync to mains)

    • 50/60 Hz +/- 3 Hz Sync to mains


Other Output Voltages

    • 220, 240


Load Crest Factor

    • 3 : 1


Topology

    • Double conversion online


Waveform type

    • Sine wave


Bypass

    • Built-in bypass


Input

Input frequency

    • 40 - 70 Hz Auto-sensing


Input voltage range for main operations

    • 50 - 150 40% load, 80 - 150V


Number of Power Cords

    • 1


Batteries & Runtime

Battery type

    • Lead-acid battery


Included Battery Modules

    • 1


Typical recharge time

    • 3 hour(s)


Nominal Battery Voltage

    • 48 V


Replacement Battery

    • APCRBC155 (sold separately)


Expected Battery Life (years)

    • 3 - 5


Battery Charge Power (Watts)

    • 97 Watts


Extendable Run Time

    • 1


Extended Run Options

    • APC-Smart-UPS-SRT-1000VA-RM-230V-Network-Card


Communications & Management

Interface Port(s)

    • RJ-45 Serial, Smart-Slot, USB


Pre-Installed SmartSlot Cards

    • AP9631


Control panel

    • Multifunction LCD status and control console


Audible Alarm

    • Audible and visible alarms prioritised by severity


Emergency Power Off (EPO)

    • Yes


Surge Protection and Filtering

Surge energy rating

    • 432 Joules


Physical

Maximum Height

    • 85MM, 8.5CM


Maximum Width

    • 432MM, 43.2CM


Maximum Depth

    • 505MM, 50.5CM


Net Weight

    • 21.0KG


Colour

    • Black


Environmental

Operating Temperature

    • 0 - 40°C


Operating Relative Humidity

    • 0 - 95 (Non-condensing) %


Operating Elevation

    • 0 - 3048 metres


Storage Temperature

    • -20 - 50 °C


Storage Elevation

    • 0 - 15240 metres


Audible noise at 1 metre from surface of unit

    • 50.0dBA


Online thermal dissipation

    • 317.0BTU/hr


Protection Class

    • IP20


Conformance

Approvals

  • CE, EAC

Standard Warranty: 3 years

View full details