Ubiquiti UF-MM-10G SFP+Modules Two Pack Gigabit Multimode Fiber SFP+ Transceiver allows you to upgrade or expand specific Ubiquiti switches for faster network operations.

This 10-Gigabit SFP+ Transceiver Module kit is compatible with all Ubiquiti products that support the UF-MM-10G SFP+ Transceiver.

Key Features

• Ubiquiti switch compatible.

• 10-Gigabit Fibre SFP (10 Gbps).

• Duplex LC connector.

• 850 nm wavelength.

• Up to 300 meter reach (Distance).

Ubiquiti U-Fiber UF-RJ45-10G SFP Transceiver Module is an SFP transceiver module that allows you to connect a copper Ethernet cable to an SFP or SFP+ slot for distances of up to 100 m and speeds of up to 10 Gbps

• Supported Media: Copper

• Connector Type: RJ45

• Data Rate: 1/10 Gbps

• Cable Distance: 1 Gbps: (Cat 5e) 100 m, 10 Gbps (Cat 6A) 30 m

• Pack Options: 1-Pack

Fiber Modules
UFiber modules are available as single-mode or multi-mode models to suit your fiber connectivity applications.

• UF-MM- 1G

• UF-MM-10G

• UF-SM-1G-S

• UF-SM-10G

• UF-SM-10G-S

• UF-RJ45-1G

• UF-RJ45-10G

FIBER MODULE OVERVIEW
Ubiquiti Networks offers a variety of U® Fiber modules to suit your fiber connectivity applications.
Two multi-mode models are available:
• UF-MM-1G: SFP, 1 Gbps
• UF-MM-10G: SFP+, 10 Gbps
Three single-mode models are available:
• UF-SM-1G-S: SFP, 1 Gbps, BiDi
• UF-SM-10G: SFP+, 10 Gbps
• UF-SM-10G-S: SFP+, 10 Gbps, BiDi

Two copper models are available:
• UF-RJ45-1G: 10/100/1000 Mbps
• UF-RJ45-10G: 1/10 Gbps

Indoor Runs
For convenient multi-mode connections that extend beyond the 100-meter limitation of Ethernet cabling, use the UF-MM-10G for distances of up to 300 m and speeds of up to 10 Gbps, or use the UF-MM-1G for distances of up to
550 m and speeds of up to 1 Gbps. To connect copper Ethernet cables to SFP ports, use the UF-RJ45-10G in an SFP+ port for speeds of up to 10 Gbps
and distances of up to 30 m, or use the UF-RJ45-1G in an SFP port for speeds of up to 1 Gbps and distances of up to
100 m. For short distances of 1 to 3 m, use the UDC-1, UDC-2, or UDC-3 direct attach passive copper cables between SFP+ ports for speeds of up to 10 Gbps.

Outdoor Use
For long-distance single-mode runs, use the UF-SM-10G for distances of up to 10 km at 10 Gbps, or use the
UF-SM-1G for distances of up to 3 km at 1 Gbps. To protect DC power and fiber, deploy Edge Point with
Edge Power.
Deploy a BiDi (Bi-Directional) model, UF-SM-1G-S or UF-SM-10G-S, to maximize re-use of existing infrastructure. You must deploy a BiDi model as a paired set of modules because the pair uses two different wavelengths, upstream and downstream, on a single fiber.

Standard warranty: 1-year