Ubiquiti UISP-FIBER-XG GPON Unit
Ubiquiti UISP-FIBER-XG GPON Unit
SKU:UISP-FIBER-XG
Out of stock
Ubiquiti UISP-FIBER-XG GPON Unit
Ubiquiti UISP-FIBER-XG GPON Unit can deliver 2.5Gbps uplink/10Gbps downlink speeds over distances up to 20 km.
Ubiquiti XG-PON UISP UFiber GPON ONU Optical Network Unit
Ubiquiti UISP-FIBER-XG GPON Unit
Ubiquiti UISP-FIBER-XG GPON Unit can deliver 2.5Gbps uplink/10Gbps downlink speeds over distances up to 20 km.
Key Features
- One (1) XG-PON optic SC/APC port.
- One (1) 2.5GbE RJ45 LAN port that supports 24V passive PoE.
- Bridge and Router Mode support.
Specifications
Mechanical
Dimensions
- 100 x 100 x 27 mm (3.9 x 3.9 x 1.1 in.)
Weight
- 220 g (0.49 lb.)
Enclosure material
- UV-stabilised polycarbonate
Hardware
Networking interface
- (1) SC/APC, ITU-G.987 XGPON WAN port
- (1) 100/1,000/2,500 MbE RJ45 LAN ports
Management interface
- Ethernet in-band
- PON
PoE interface
- (1) PoE in, 24V DC passive PoE
Memory
- 256 MB DDR
Onboard flash storage
- 32 MB NOR
Max. power consumption
- 6W
Power method
- USB-C 5V DC, 3A
- 24V DC passive PoE
Power supply
- 5V DC, 3A power adapter
- Passive PoE 2-pair (4, 5+; 7, 8-)
Supported voltage range
- 5V DC adapter
- 10–30V DC passive PoE
Total non-blocking line rate
- Downstream: 9.95 Gbit/s
- Upstream: 2.44 Gbit/s
Normal TX range of optical module
- 2 to 7dBm
Normal RX range of optical module
- -9 to -27dBm
Button
- (1) Factory reset
Operating temperature
- -15°C to 45°C (5°F to 113°F)
Operating humidity
- 10% to 95% non-condensing
Certifications
- CE, FCC, IC
Fibre
Operating wavelength
- TX: 1,270nm
- RX: 1,577nm
Line code
- Scrambled NRZ
Physical reach
- 20 km
LEDs
Power
- White: ON
Ethernet
- Steady white: link up
- Blinking white: activity
- OFF: link down
PON status
- (3) signal LEDs
- All-OFF: bootup
- 1x orange: signal too low (< -27 dbm)
- 1x white: signal low (>= -27 dbm)
- 2x white: signal good (>= -24 dbm)
- 3x white: signal strong (>= -12 dbm)
- 1x orange + 2x white: signal too strong (>= -9 dbm)
- 3x orange: no signal
- LEDs alternate between orange + white + orange and a signal strength indicator: no authority
Note: This device is only compatible with the UISP Fibre XGS OLT. It cannot be used with third-party OLTs.